进口ULTEM PEI 9070环保纯料-东莞市樟木头宇涛塑胶原料经营部

产品展厅

您当前的位置：网站首页 > 产品展厅 >PEI塑胶原料 >进口ULTEM PEI 9070环保纯料

进口ULTEM PEI 9070环保纯料

产品详请

ULTEM PEI 9070环保纯料

ULTEM PEI 9070 高流动性聚醚酰亚胺混合物。符合FAR 25.853和OSU 65/65标准，具有低毒性、烟雾和火焰演变。符合环保要求。

TYPICAL PROPERTIES ⁽¹⁾
MECHANICAL机械性能	Value	Unit	Standard
Tensile Stress, yld, Type I, 5 mm/min / 抗张程度,屈服,类型I,5 mm/min	96	MPa	ASTM D 638
Tensile Strain, brk, Type I, 5 mm/min / 拉伸伸长,断裂,类型I,5 mm/min	70	%	ASTM D 638
Tensile Modulus, 5 mm/min / 拉伸模量,5 mm/min	3370	MPa	ASTM D 638
Flexural Stress, yld, 2.6 mm/min, 100 mm span	137	MPa	ASTM D 790
Flexural Modulus, 2.6 mm/min, 100 mm span	3170	MPa	ASTM D 790
IMPACT	Value	Unit	Standard
Izod Impact, notched, 23°C / 悬臂梁缺口冲击强度23°C	85	J/m	ASTM D 256
Izod Impact, Reverse Notched, 3.2 mm	1975	J/m	ASTM D 256
Gardner, 23°C	23	J	ASTM D 3029
THERMAL	Value	Unit	Standard
HDT, 1.82 MPa, 6.4 mm, unannealed / 热变形温度，1.82 MPa, 6.4 mm, 未退火	196	°C	ASTM D 648
PHYSICAL	Value	Unit	Standard
Specific Gravity/比重	1.3	–	ASTM D 792
Mold Shrinkage, flow, 3.2 mm / 模塑收缩量，流动，3.2 mm	0.5 – 0.7	%	SABIC Method
Mold Shrinkage, xflow, 3.2 mm / 模塑收缩量，横向，3.2 mm	0.5 – 0.7	%	SABIC Method
Melt Flow Rate / 熔流率, 337°C/6.6 kgf	11	g/10 min	ASTM D 1238
FLAME CHARACTERISTICS	Value	Unit	Standard
FAA Flammability, FAR 25.853 A/B	SECT A-1	–	FAR 25.853
OSU total heat release (2 minute test)	5	kW-min/m2	FAR 25.853
OSU peak heat release rate (5 minute test)	40	kW/m2	FAR 25.853
Vertical Burn a (60s) passes at	5	sec	FAR 25.853
Vertical Burn b (12s) passes at	0	sec	FAR 25.853